Thermospan® 200 and 200-20
A door that represents the best technology available today.

Architects, engineers, contractors and building owners who place energy conservation foremost in their planning will readily recognize the significance of Thermospan® 200 & 200-20, an insulated overhead sectional door for commercial and industrial applications.

Features:

Energy efficiency - Thermospan® 200 & 200-20 is a total insulating system, including thermal barrier and joint seals as well as vinyl top seal and bottom astragal-all attached to the door sections. All seals are factory-installed to save installation time and avoid the problems sometimes found on conventional doors due to inadvertent exclusion of seals during installation.

Extended limited warranty Sections are warranted for TEN (10) YEARS against cracking, splitting, or deterioration due to rust-through, and SEVEN (7) YEARS against separation/degradation of foam insulation. TEN (10) YEARS on insulation value.

Thermospan® 150 Features

Designed to be Energy-Efficient! Insulation materials placed between two metal surfaces without a thermal break greatly reduce the effectiveness of the insulation. Generally, the outer surface of conventional steel doors wraps around and becomes a part of the inner door surface. The process used to make Thermospan®150 is different. It begins with two separate skins: one for the inner and another for outer surfaces. These skins are separated along each edge of each section by a thermoplastic material that effectively breaks any contact between inner and outer skins.

To assure thermal integrity, seals between all section joints are factory-installed, as are vinyl “bulb” astragals which prevent air infiltration between floor and bottom of doors. Because of these features, an excellent “U”-value of 0.0706 is achieved. Testing on a conventional insulated steel door resulted  in a “U”-value of only 0.233.

Thermospan® 125 Features

Maximum efficiency and operation - Chemical bonding of CFC free polyurethane to steel skins creates a unitized body with superior strength, insulation and dent-resistant characteristics.

Energy efficiency - The polyurethane core is surrounded by hot-dipped galvanized steel skins providing insulating efficiency. The Thermospan 125 has a R-value of 10.79. A bulb-shaped vinyl astragal provides added protection against air and water infiltration.

Steel Gauge Commercial Sectional Doors
Combining value with security and rugged construction

Steel gauge doors are used for commercial applications combining value with security and rugged construction. As the industry leader in sectional steel products, Wayne-Dalton offers a variety of standard and customized designs.

Steel Gauge Commercial Sectional Doors Features

Durability - Roll-formed exterior ribs and baked on polyester paint.

Aluminum Full View Doors
Combining maximum light and visibility with security

Aluminum series doors are used for commercial applications combining maximum light and visibility with security. As the industry leader in sectional garage doors, Wayne-Dalton offers a variety of standard and customized designs.

Aluminum Full View Doors Features

Durability - Model 451/452 has a minimum wall thickness of .062" on the rail body while model K-AL has a minimum wall thickness of .058" on the rail body.

Aluminum Stiles & Rails

• Model 451/452 - 6063T6 alloy
• Model K-AL 6063T5 alloy

Wood Commercial Sectional Doors
Combining durability and a rustic look with security

Wood doors are used for commercial applications combining durability and a rustic look with security. As the industry leader in sectional garage doors, Wayne-Dalton offers a variety of standard and customized designs.

Wood Commercial Sectional Doors Features

Durability - ¾" thick commercial construction with primer finish

Stiles & Rails - Hemlock or stika spruce.

Insulation - Model 320 polystyrene core

The CS-200 is our mid-range commercial/industrial steel door. Providing polystyrene core sandwiched between two steel skins, the door is ideally suited for light duty commercial applications where energy efficiency matters.

Door Features

• Monolithic plank sections, 18", 21", or 24" high.
• Features four evenly spaced micro-grooves that run horizontally across each section.
• Double-sided steel doors are 26 gauge front and 27 gauge back for sturdiness.
• Concealed steel plates run continuously from top to bottom for each section for fastening hardware.
• Section joints are tongue-and-groove.
• White painted end-stiles.
• Environmentally safe CFC-free polystyrene core.
• Polystyrene insulation secured in place with a urethane adhesive to increase structural integrity.
• R-Value of 8.72, U-value of .11.
• Door sections are 2" thick and micro-grooved with deep wood-grain texture.
• Sandwich-type construction with interior steel plates which run top-to-bottom for attachment of hardware.
• 10 year limited warranty. See warranty sheet for complete details.
• Available in white and brown.
• Download a PDF brochure.

The CS-300 commercial/industrial steel door is designed for maximum thermal efficiency and rugged commercial uses.

Door Features

• Monolithic plank sections, 18", 21" or 24" high.
• Microgrooved sections for commercial appearance.26 gauge outside, 27 gauge inside steel skins.
• Polyurethane foamed in place insulation R-value 14.3.
• 24 gauge galvanized steel reinforcement plates at hinge locations.
• Tongue and groove joints thermally broken.
• 2" thick sections.
• Options available to suit windload specifications.
• Available in white and brown.
• 10 year limited warranty, see separate warranty sheet for complete details.
• Download a PDF brochure.

The ST/STI model is our most rugged and economically priced commercial/industrial product. Normal applications include those sites where energy efficiency is a low priority and durability is a high one.

Door Features

• Each door measures a full two inches thick and is designed for the heaviest industrial and commercial applications.
• Combining a macro and micro ribbed construction strengthens the door for impact. Tongue and groove construction provides for a tight closure.
• At the bottom of each door, wind, dirt, and moisture are locked out by a U-shaped astragal with an aluminum retainer. Easily field-replaceable.
• Maximum strength and durability are achieved by both bonding and riveting heavy gauge end and intermediate stiles to the steel panels.
• This product is available in both an insulated (STI) and an uninsulated (ST) version depending upon specification. All doors may be insulated with moisture-resistant polystyrene insulation. Back-up covers are 26 gauge Galvalume galvanized steel.
• These models are available in two weights: 24 gauge and 20 gauge. All doors have the same deep-ribbed panel design. The 24 gauge series is utilized for standard duty installations. The 20 gauge model is specifically recommended for higher traffic areas.
• Window Lites are available on all doors. The Lites are available either 24" x 5" or 24" X 11". All windows are 1//8" plexiglass. Double glazing in these sizes is also available.
• For full vision, white baked enamel, aluminum-framed glass sections, glazed with double thick glass, may be installed the full width of any door. One section per door is the maximum recommended.
• Before shipment each door is carefully inspected to ensure that it meets our rigid quality control standards. As a further assurance of reliability, each door comes with a full twelve-month warranty against defects in materials and workmanship.
• Torsion springs, which ride on a full-width ball bearing header shaft, are custom-wound of oil-tempered wire and calibrated to within ounces of door weight. Special extra long-life springs available at additional cost.
• Each door is completely pre-punched for all mounting hardware, which is furnished with hardened thread-cutting screws. The result: quick, accurate, permanent alignment.
• Vinyl in aluminum extrusion may be attached to the top edge of the door to provide a positive seal at the lintel. Also available as a perimeter seal for use on side jambs.
• The ST/STI is available in White and Brown.
• Track is edge conditioned to reduce risk of injury from sharp edges.
• Download a PDF brochure.

Lexington models are ideal for applications where an aluminum door with full window capabilities is required. These doors each offer superb welded joint craftsmanship and provide an unmatched aesthetic beauty

Door Features

• Maximum Size Limits: 24’2" wide, 18’0" high.
• Rails and Stiles: To be joined by heli-arc welds in unexposed locations. Rails and stiles to be extruded from 6063-T6 alloy. Door thickness 1 3/4". Bottom rail - 4 1/2". Meeting rails - 3 3/8". Top rail - 2 3/4" up to 16’2" wide, 4 1/2" over 16’2" wide. End stiles - 3 3/8". Center stiles - 3 1/2".
• Finish: Anodized per Aluminum Specification A-21. Stock colors: clear anodized, dark bronze and baked on white.
• Panels: 051 Anodized aluminum sheet.
• Glass: DS 1/8" window glass set in continuous vinyl channel and held in place with a rigid plastic snap in bead. Polycarbonate Glass also available.
• Bottom Weather Seal: Cold weather vinyl astragal.
• Track: Galvanized 2" or 3" track as required by door size, vertical track-bracket or angle mounted, horizontal track angle mounted. Also available as a High Lift or Vertical Lift.
• Hardware: Stamped 14 gauge galvanized steel.
• Rollers: Heavy duty industrial 11 ball nylon Quiet Glide rollers.
• Counter Balance: Torsion springs, cast aluminum drums, aircraft cable.
• Locking Device: Interior slide bolt.
• Reinforcing: Steel U-bar struts on doors over 14’3" wide.
• Wind Load: All doors constructed to meet or exceed standards established under National Association of Door Manufacturers’ specification 102-1988

PIONEER's new value priced EHP Series Hydraulic Leveler creates a cost effective path for your customers to migrate from mechanical to fully hydraulic pit levelers. The EHP adds hydraulic capacity to the proven features of the P2000 Series mechanical levelers. The result is a product that is just what many of your customers can use to automate their loading docks.

Features

• 55,000 lb. Minimum yield steel tread plate on the deck and lip
• Structural "C" channel deck supports are fully welded to full width header plate
• Push button electric hydraulic actuation
• In-line safety stop prevents sudden fall of deck
• Standard working range toe guards
• Grease fittings on lip hinge
• Molded bumpers, two per dock leveler
• 16" Lip projection - 12" beyond bumpers
• Deck to tilt 4" from side to side to compensate for unlevel trucks
• Cross traffic support and night lock security to be provided by lip stored in lip keepers
• Standard maintenance strut
• Standard 25,000; 30,000; 35,0000; 40,000; and 45,000 lb. dynamic capacities
• Operating range of 12" above to 12" below deck
• Leveler may be recycled with truck in position
• Yieldable lip
• Download a PDF brochure.